FigureC
May 27, 2015
Figure. C: Swagging
phone: 866.452.1845
fax: 866.452.9173
Figure. C: Swagging
Figure B: Shims
Fig. A Pips
Condition 4 : Out Of Square Hinge or Strike Jamb (Toe Out)
Condition 3: Out Of Square Hinge or Strike Jamb (Toe Out)
Condition2: Gap Too Small at Lock Edge
Condition 1: Gap too big at lock edge
Figure. 9: The door should rest against the silencers with no gaps at lock edge. Hinge edge of door should be consistent and not hitting the frame stop.
Figure. 8: Clearances should be 1/8” at head and jambs with a tolerance of +1/16” or -1/32” for the opening size.
Figure 7: Recommended fastener is a #8 pan head SMS